MultiVolt® – Order phase specific operator for the job and have the ability to select the right voltage on the job site.
– Single Phase: 115/208/230V AC
– Three Phase: 208/230/460V AC
– 575V AC voltage models available separately
Modular design with optional expansion boards for advanced timer to close, and auxiliary output functionality.
LCD display with intuitive setup menu. Provides real-time status and trouble-shooting assistance.
Internal receiver with the ability to individually add/delete up to 50 Intellicode® transmitters directly from the LCD display.
EZ Limit® provides for push to set limits that stay synchronized with door through long-term loss of power.
TensiBelt® primary drive reduction eliminates need to adjust belt tension.
Open/close/stop and setup keys included on control board. Keeps all controls near the LCD display convenient for set up.
AC continuous-duty motor. Motor replaceable without changing limits. Thermally protected.
Primary – TensiBelt® auto tensioning poly-V J-belt.
Secondary – Chain and sprocket reduction
24V DC disc brake standard on 3/4 and 1 HP models; option on 1 D2 HP models.
Adjustable clutch to help protect against door and operator damage.
Precision Radial Ball Bearings
Incuded in critical areas throughout the powertrain.
2″ heavy-gauge roll formed angle with nylon chain guides.
Drawbar disconnect via pull cord for manual operation of door.
Pre-wired to accept:
Monitored entrapment device such as photo eyes.
Single or 3-button control stations.
External interlock switches.
Accessories and Options
Timer to Close Module
Timed close set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and monitored edge input.
Auxiliary Output Module
Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both.
Available in single up to four button, or open/close/stop models.
Totally enclosed non-ventilated, or fan-cooled motors available – Must be ordered from the factory. NEMA 4 or NEMA 4X environmental modifications – Must be ordered from the factory.
UL325-2010 Approved Reversing Devices
The installation of a monitored external entrapment device is required for momentary contact close operation on all commercial door operators. Only the following devices, when purchased through Genie, are UL-approved for use to meet this requirement:
Safe-T-Beam® Photoeye Kit with adjustable bracket P/N 38176R.S1
There are no reviews yet.